ePrivacy and GPDR Cookie Consent management by TermsFeed Privacy Generator

Materials

Which plastic materials are suitable for recycling with the ISEC evo?

 

The ISEC evo plastic recycling system is a true material all-rounder. A wide variety of plastic materials are suitable for recycling with the shredder/extruder plant.

The Advantages of ISEC evo

Material all-rounder

Top energy efficiency

High quality recycled pellets

Materials

 

A wide range of plastic materials are suitable for recycling with the ISEC evo.
The material all-rounder efficiently processes various types of plastic and material shapes. Among others, the following materials can be pelletized:

LDPE Stretch
LDPE Stretch
Pipes
Pipes
PE start-up lumps
PE start-up lumps
PP edge trim
PP edge trims
Raffia and Big Bags
Raffia and big bags
PP filaments
PP filaments
Lumps
Lumps
Ropes/cables
Ropes/cables
Fiber bales, endless tapes
Fibre bales, endless tape
PP injection molded parts
PP injection-molded parts
PA injection molded parts with or without fiberglass
PA injection-molded parts with/without fiberglass
Irrigation hoses
Irrigation hoses
Irrigation pipes
Irrigation pipes
Automotive parts
Automotive parts
PE briquettes
PE briquettes
PE artificial grass, production waste
PE artificial grass, production waste
PP nonwovens, geotextiles
PP nonwovens, geotextiles

Recycled Pellets

 

When recycling plastic materials with the ISEC evo, different shapes of recycled pellets can be achieved:

 

Spherical recycled pellets

 

Spherical recycled pellets

Lenticular recycled pellets

 

Lenticular recycled pellets

Cylindrical recycled pellets

 

Cylindrical recycled pellets

Do you have any questions about recycling specific plastic materials?
Our team would be pleased to help you at any time.

Contact us now

 

ISEC evo Configurations for Recycling Various Types of Plastic Materials

 

When recycling plastic materials , different requirements are placed on a machine depending on the material. The ISEC evo is implemented in two configurations. These are differentiated between "degassed" and "non-degassed".

As experts in plastic materials recycling with over 35 years of experience, we are pleased to advise you on the specific configuration of your plant.

 

 

The ISEC evo degrassed

Machine Configuration "Degassed”

Hygroscopic materials and plastics with a total moisture content of up to 4% or subsequent impurities are processed with a degassing machine: 

  • moisture that occurs during production or quality assurance processes,
  • Spin finish such as spinning oils,
  • Light printing.


Hygroscopic materials attract and absorb moisture from the air. Examples include:

  • Polyester
  • Polyamide

Find out more about the degassed machine configuration in our press releases and success stories:

 

Bringing process waste recycling in-house synthetic turf

For its Fibres and Fabrics production facility in the Netherlands, recently TenCate Grass has put a shredder-extruder recycling machine, supplied by PURE LOOP, fully into operation...

Efficient recycling of injection mouldings

The shredder-extruder technology ISEC evo supports the plastics processor Arexim in Bulgaria in achieving their goal of a waste-free production cycle.

High flexibility in film recycling with ISEC

Axel Rivera, CEO of Foam Industrial: "More flexibility, more output, less power consumption and more efficiency. That's what I found in PURE LOOP. I am so happy!"

Use of regranulate from thermoplastic sheet offcuts in injection moulding

Thermoplastic composites are paving the way for lightweight automotive design into the circular economy...

 

 

Machine Configuration "Non-Degassed”

The "non-degassed" machine configuration is suitable for materials that are

  • contain less than 1% moisture and
  • are not hygroscopic.

Application examples and success stories for the "non-degassed" machine configuration are:

 

 

The ISEC evo non degrassed

Pens made from recycled plastic

For more than 160 years, STABILO International has been producing billions of writing instruments used by people all over the world.

Gentle Recycling of Plastic Materials with ISEC evo

The plastics recycling machine ISEC evo

The integrated shredder/extruder combination ensures high quality recycled pellets. This is made possible by careful preparation.

Find out more about the technology here

Would you like to test your plastic materials to see if they are suitable for recycling with the shredder/extruder combination?
Contact us now

 

Test ISEC evo

Find out if your plastic materials are suitable for recycling with the ISEC evo.
Available since April 2021, you can test our plant at 2 locations.

 

Map Austria with marking near Ansfelden

Austria: EREMA Customer Center in Ansfelden

 

Map USA with marker at Ispwich, USA

USA: EREMA North America in Ipswich, MA

 

Support and detailed information is provided during the test by a team of experienced technicians.

Contact us

We will soon reply to you

 
 


* Mandatory fields